Stationary Chrome Stripper Pole

Swing, slide and grind on this stripper pole. Whether you're giving the striptease that will make your lover's heart beat faster or getting an exciting workout in (or both!), this pole will have you feeling sexy and looking great. You'll surely want to show off your moves and take your sex life to the next level once your partner sees how talented you are. Go ahead, shake your booty and get the party started the right way with this fun toy!

• Exclusively at Spencer's
• Includes:
  • Stripper Pole
  • Carry bag
  • Installation tool
  • Instruction manual
• Max Capacity: Up to 250 lbs.
• Dimensions:
  • Max width (Top & bottom metal plate) : 200mm (7.87")
  • Metal tube: 50 mm (1.97") Diameter
• Fits ceilings from 7'6" to 9'
• Sturdy installation
• Material: Steel, plastic
• Care: Spot clean
• Imported
• No permanent mounting required

Instructions: Install only on a concrete ceiling or directly under a ceiling joist.

Step 1: Using screws provided, attach the bottom plate to the threaded rod.

Step 2: Screw two longest metal tubes together. Insert the plastic cover over the metal tube assembly.

Step 3: Screw the pole assembly from Step 2 onto the bottom assembly from Step 1. Measure your ceiling height, then refer to the chart to see which extensions, if any, you will need.

Step 4: Using the plastic connectors, connect extensions if needed. Attach top plate by firmly pushing it into the end of pole assembly.

Step 5: Extend the pole by turning it counter clockwise until it's hand tight against the ceiling. Make sure pole is straight and perpendicular to floor; must be at 90 degree angle to floor and ceiling. Adjust pole until it is perfectly straight.

Step 6: Tighten pole using the tool provided. Hold the pole and check to make sure it is steady and doesn't move when firm pressure is applied sideways. Screw lock nut all the way up; tighten with tool until snug. Do not over tighten. Lower bottom assembly cover.

Note: Consult manual for full directions before installing.