• Trend Shop
  • Clearance
  • 2 Ft Pumpkin Guardian Grave Animatronics - Decorations
  • 2 Ft Pumpkin Guardian Grave Animatronics - Decorations
  • 2 Ft Pumpkin Guardian Grave Animatronics - Decorations
  • 2 Ft Pumpkin Guardian Grave Animatronics - Decorations
  • 2 Ft Pumpkin Guardian Grave Animatronics - Decorations

2 Ft Pumpkin Guardian Grave Animatronics - Decorations

Item# 01257724
Online Only Exclusive

Your haunted house scheme will be the scream of the neighborhood with the Pumpkin Guardian Grave! This ultra-scary pumpkin has a glowing green light-up mouth and eyes. This guy will become a staple for your Halloween set up for many years to come.

  • Exclusively at Spirit
  • Includes:
    • Pumpkin animatronic
    • Adapter
  • Indoor/sheltered outdoors use
  • Animated
  • Sound activated
  • Step pad compatible
  • Adapter Type: 6V/2A (included)
  • Battery Type: 4 AA (not included)
  • Cord Length: 6 feet
  • Dimensions: 27.56"H X 33.86"L X 52.36"W
  • Weight: 5.4 pounds
  • Materials: Plastic, fabric
  • Imported
  • Note: Step pad and fog machine sold separately

Get Product Guide

Sold Out.

Loading...
  • Reviews

REVIEW SNAPSHOT®

by PowerReviews
Spencer's2 ft Animated Pumpkin Guardian Grave - Decorations
 
1.0

(based on 2 reviews)

Reviewed by 2 customers

Displaying reviews 1-2

Back to top

 
1.0

Waste of money

By 

from Ontario Canada

About Me Midrange Shopper

Pros

  • Attractive Design

Cons

  • A PAIN TO ASSEMBLE
  • DOES NOT WORK
  • Low Quality
  • OVER PRICED

Best Uses

    Comments about Spencer's 2 ft Animated Pumpkin Guardian Grave - Decorations:

    This was a new prop for me Halloween 2016 really looked forward to using it but turned out to be not worth the money. It would be a great prop if it worked properly unfortunately it doesn't. Should rename it the Reluctant Pumpkin Grave Guardian as the sensor is useless doesn't work unless some kid taps him on the head. Had the sensor been located on the tombstone instead of the head it would trigger. The pumpkin head doesn't rise straight up instead it begins slightly twisted and becomes more exaggerated the longer he is on eventually you're looking at the back of his head while he speaks. Putting together the skinny tombstone is a pain it's difficult to get the three pegs into the nonexistent pre-drilled holes without damaging the tombstone. On the positive side about this prop the head is well constructed and creepy looking when connected to a fog machine the smoke coming out his mouth is a very cool effect and the voice and the phrase is spooky. Have lots of animatronics this one is by far the most disappointing the poor sensor and the twisting pumpkin head just doesn't cut it. Its junk way overpriced not worth more then $50! If you're determined to purchase this spend an extra $10 and get a foot pad it's the only way you'll be sure this dud will rise.

    (3 of 3 customers found this review helpful)

     
    1.0

    Bad Sensor and Flimsy

    By 

    from USA

    About Me Midrange Shopper

    Pros

    • Attractive Design
    • Unique

    Cons

    • Bad Sensor
    • Delicate
    • Low Quality

    Best Uses

    • Good to Return to the Store

    Comments about Spencer's 2 ft Animated Pumpkin Guardian Grave - Decorations:

    Assembly wasn't very easy, even though the instructions were written well enough. The pre-punched holes on the tombstone bottom didn't match the hole placement on the tombstone top, so the two pieces when assembled were misaligned; I had to make some new holes to ensure a better fit. Also, the prototype photo on the website shows that the tombstone top and bottom sections' seam is a smooth horizontal line; in reality, the seam is in a zigzag, so fitting the pieces together with the misaligned holes is tricky. Also, the black fabric cape of the Guardian has lots of static, so be prepared for threads to cling to you while you snap the pieces together.

    You'll notice after assembly that the attached fog hose gets in the way a lot. I decided to forgo the fog machine, so I tucked the hose behind him carefully. I placed him near the path, turned on the switch, and waved my hand in front of the sensor. Nothing. I repeated my actions, and still nothing. I walked behind him to see if the switch was working, and he started. He rose and said his line, but while he was elevated, the fog hose shifted. As he sank down, the hose caused his body to shift and hit the tombstone. I then had to move the hose, which finally allowed the prop to withdraw behind the tombstone.
    I tried again to activate him, so this time, I walked to the front of the prop and clapped my hands to test the audio sensor, but again, nothing happened. I clapped a few times before the Guardian activated. But, like before, the fog hose was twisting, and his body kept swaying and shifting while he was up. I rigged the hose so it wasn't dragging, but it ruined the illusion, as it was now clearly visible.
    Of all the visual/audio sensor tests, Pumpkin Guardian only responded about 50% of the time, and mostly his reactions were delayed. Suffice to say, I was disappointed with Pumpkin Guardian of the Grave, and I returned him.

    Displaying reviews 1-2

    Back to top